山东罗茨鼓风机

NEWS

PRODUCT

CONTACT US

Shandong zhangqiu yi tai machinery manufacturing co., LTD

Contact: xin-sheng cheng

Telephone: 13705411652

The  true: 0531-83209474

WeChat ID: 13705411652

Q       Q: 2458379166

Mail  box: 6411111111 @163.com

Web  site: www.zqlcfj.com

Company address: Shandong zhangqiu MingShui hou home park street



Your current location: HOME >> News >> Industry News

Three-blade roots blower attention before installation

Release date:2015-11-25 00:00 Source:http://www.zqlcfj.com Views:

 

  Three-blade roots blower piping requirements 1, fan pipe should connect closely, shall not leak, stent in place Settings. 2 the pipeline, the material should be able to withstand the exhaust temperature and pressure. (try to use steel tube) 3, pipe internally to clean, no foreign body, prevent sundry into. 4, to install the check valve in the pipeline, prevent backflow by fan reversal caused by high pressure gas entering the fan, cause damage to the fan. Note: check valve to be installed in horizontal pipe runs. 5, more than one fan is in operation, each in charge of road gate valves must be set (including one fan repair, as of the pipe). 6, emptying valve, pipe on the pipe to prevent starting with load, fan fan should no-load starting again after gradually close the drain valve. When loading operation, stop, also should open the drain valve after confirm the fan with no load, shut down the fan again. Three-blade roots blower fan installation requirements 1, the foundation is solid, surface must level off, and more than 10 to 25 ㎝ ground. With sufficient space to around 2, fan, to meet the needs of the maintenance and disassembly. 3, fan working environment temperature shall not exceed 40 degrees Celsius, such as more than when, should take measures to cool, or shorten the service life of fan. 4, fan outdoor configuration, please set the canopy. Three-blade roots blower is running in front of note: 1, do you have any impurity interfuse, piping errors, such as the valve is fully open. 2, please make sure the screw pin lock of roots blower and the non-return valve is normally open, etc. 3, before the installation of roots blower, please check whether the foundation bolt locking. 4, please make sure the lubricating oil to the oil mark the central red dot, more than too much will automatically discharge. 5, piping for roots blower have add unnecessary load.

  - three leaves roots blowers zhangqiu yi tai machinery manufacturing co., LTD. Is a professional manufacturer of roots blower ZLSR company. Its main products are roots blower, roots blower, and three leaves roots blowers three-blade roots blower, high pressure blower, ZLSR, three leaves roots blowers ZLSR fan is my company to design, development, production of a highly efficient, energy saving, environmental protection and new products. This wind turbine parts adopt numerical control machining center for processing, and has advanced detection equipment and high-quality personnel, to ensure that each factory equipment and have high quality, high service life. The company to provide you with perfect pre-sales consulting and after-sale tracking service, for every customer to remove trouble back at home, the new and old customers get the praise. My company is located in the east of jinan MingShui, jinan-qingdao road north, 18 kilometers away from jiqing expressway, jiaoji railway traverses MingShui city, traffic is very convenient. Welcome all customers to visit my company guidance, business negotiations. Telephone: 13705411652

  


Related tags:罗茨风机

recently viewed: